You are here: Home > 3M Communications > 3M Communications Copper Connectors and Splices > 3M 710 Modular Connectors and Tools > 3M 710 Splicing Rig and Tools > 3M 710 Splicing Rig Tools
We found 0 results matching your criteria.
3M 710 Splicing Rig Tools
3M 710 Splicing Rig Bridge To Splice Tool 3M 710 Splicing Rig Cap Removal Tool
A hand tool used to press 3M 710 Bridge Modules and 3M Splices or Half-Tap Modules together, and to press caps onto 3M 710 Modules. 3M710bsp
For removal of caps from connector modules to rearrange pairs or perform maintenance wire work.
3M 710 Splicing Rig Conductor Wire Cut-Off Tool 3M 710 Splicing Rig Insertion Cutting Tool
For cutting off through-conductor wires that will not be used after half-tapping. All wires are cut individually in a single operation to remove the chance of shorting & interrupting service.
For cutting and terminating one conductor pair at a time in a 710 connector module. This facilitates rearrangement of the modular splice when space is limited or for individual pair maintenance.
3M 710 Connector Splice Support 3M 710 Splicing Rig Blade Holder Tool
3M 710 Modular Connector Splice Support
Protective metal blade holder for steel blade. Blade not included.
3M 710 Splicing Rig Bridge Removal Tool 3M 710 Splicing Rig Bridge Support
For removing bridge connectors from the connector module.
3M 710 25 Pair Splicing Rig Bridge Support
3M 710 Splicing Rig Group Holder Kit 3M 710 Splicing Rig Maintenance Kit
3M 710 25 Pair Splicing Rig Bridge Support is an accessory for the 3M710 Unipressor Tools
Includes: 25-pair bridge support, 25 pair splice support, one 25 pair spare blade, error tester, lubricant, allen wrench, cleaning brush, hardware kit, plastic case and blade replacement instruction sheet.
3M 710 Splicing Rig Steel Blade 3M 710 Splicing Rig Test Lead
3M 710 25 Pair Rig Steel Blade
One pair, for testing one conductor pair at a time through bridge access ports on all 710 modules.
3M 710 Splicing Rig Tool Mounting Kit and Parts 3M 710 Splicing Rig Tripod Kit
A multi-piece set and spares designed to mount and support all splicing tools on splicer boxes, pedestals or racking.
A one-piece telescoping tripod used for floor supporting splicing tools.