You are here: Home > 3M Occ Health Safety > 3M Environmental Safety Products > 3M Maintenance Sorbents
We found 0 results matching your criteria.
These sorbents are available in many different configurations and can be reused numerous times with virtually no loss of sorbent capacity.   Designed for non-aggressive liquids used in daily operations including: oils, coolants, cutting fluids, aqueous-based liquids and petroleum-based products.  They do not contain abrasive granules that can damage equipment and are costly and timely to use.
3M Maintenance Sorbents are designed to sorb non-aggressive liquids, making them ideal for plant maintenance. They are lightweight, versatile and take just minutes to put in place. Maintenance sorbents are dust free and contain no abrasive granules that can damage expensive equipment. They can also be incinerated or fuel blended, leaving less than 0.2% ash. 3M Sorbents can be wrung out and reused numerous times with virtually no loss of sorbent capacity. The sorbents are offered in several configurations that allow you to get to the source of a leak before it becomes a larger problem. A gray color allows the sorbent to blend into plant appearance. As maintenance sorbents become saturated, they take on a darker gray color, making the user aware that they are ready to be changed while retaining a clean appearance. *Non-aggressive liquids are those used in daily operations which do not require the use of personal protective equipment and include: oils, coolants, cutting fluids, aqueous-based liquids and petroleum-based products.
3M Maintenance Sorbent- Drum Cover 3M Maintenance Sorbent- Folded
The sorbent drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of non-aggressive liquids used in daily operations. Contains 25 covers per case and sorbs 12 gallons/case.
This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. It is dispensed from a carrying/dispenser box in the form of a continuous roll with perforations every 16 inches.
3M Maintenance Sorbent- Pads 3M Maintenance Sorbent- Pillow
Ideal for placing in, under and around machines to catch drips. It is highly sorbent and non-granular so it will not damage plant equipment.
Small and lightweight, pillows are tear-resistant and feature a high capacity for holding liquid.  Ideal for use in a drip pan, under equipment or at the source of a leak.  Each case contains 16 pillows (each 7 inch by 15 inch) which will sorb 0.5 gallons
3M Maintenance Sorbent- Rolls 3M Maintenance Sorbent- Rug
Designed to cover large surfaces and may be easily cut to fit tight corners.  Can also be used to cover large spills or as a precaution in areas where large spills may occur.
Used in areas where foot and vehicle traffic is a concern.  Designed to sorb liquids while enduring the punishment of being tread upon, sorbent rugs are both durable and versatile.
3M Maintenance Sorbents- Mini-Boom
Maintenance Sorbent Mini-Booms can be placed around the base of equipment to help contain fluids that may leak or spill, preventing spread to adjacent work areas,