3M Modular Splicing Kits form a 5 to 25 kV 600 Amp separable insulated connector system.
The system is easy to expand and is flexible, allowing for easy disconnects and additions. Using one or more of the versatile kits, you can make virtually any kind of splice, 2-way, 3-way, 4-way, dead-end or connect cable to your gear's 600 Amp bushing with equipment connection kit.
|
|
|
3M Cable Adapter Kits
|
|
3M Dead-End Modular Kit
|
|
|
|
|
|
Any of the cable adapter kits, each for a different combination of conductor size and insulation diameter
|
|
|
|
|
|
Use the 3M Dead-End Modular Kit 5815-D for plan-ahead cable systems including submersible dead-end for cables put down during site construction.
|
|
|
|
|
|
|
|
3M Modular Equipment Kit
|
|
3M Modular Splicing Kit
|
|
|
|
|
|
|
This module permits connection to standard non-loadbreak 600 Amp bushings to provide fully shielded
|
|
|
|
|
|
The 3M Modular Splicing Kit 5815-S, your basic splice, is for two-way shielded power cable connections.
|
|
|
|
|
|
|
|
3M Modular Tap Splicing Kit
|
|
3M T-Wrench 5815-TW
|
|
|
|
|
|
|
The 3M Modular Tap Splicing Kit 5815-T provides an easy way to tap into an existing dead-end or to combine with a 5815-S splice for a 3-way installation
|
|
|
|
|
|
The 3M T-Wrench 5815-TW is required to install the connecting plugs on the 5815-S and 5815-T Kits.
|
|
|
|
|
|
|
