Each qty in cart means: 4 Each; 3M Minimum Order Qty: 4 Each; 3M Incremental Order Qty: 4 Each; Please note the product data is supplied by 3M. There may be some errors.  Please notify us if 3M Incremental Order Qty is LARGER than 3M Minimum Order Qty (Indicating a data error).; 3M Stock #: 7000001328; 3M Previous Stock #: 70006412699; 3M Catalog #: AP115; Sales UPC: 00051115234798; 3M 5 Digit Part Number: 23479; Consumer UPC: 00051115234798; Shipper UPC: 50051115234793; Inner Package UPC: N/A; 3M Stock Type: "STANDARD" that this item is typically inventoried by 3M.; Approx. 3M Time to Ship (In Business Days): 2; Shelf Life: 365 Days; Country of Origin: USA; ECCN: EAR99; Harmonized Code: 3824999210; US DOT 49 CFR: UN1219, ISOPROPANOL SOLUTION, 3, II;

3M™ Silane Glass Treatment AP115 is an IPA based silane glass treatment that is used in conjunction with 3M™ VHB™ Tape to promote adhesion. It is easy to apply using the 4 fl. oz. spray bottle and is also available in a 1 gallon bulk bottle. It is clear in color.

Promote Adhesion to Uncoated Glass Surfaces
Our 3M™ Silane Glass Treatment AP115 is a solvent mixture of isopropyl alcohol and water that is used to increase adhesion of 3M™ VHB™ Tapes to uncoated glass surfaces. Glass surfaces are water loving in nature, which can cause issues in humid or wet environments when attempting to create a strong, long-lasting adhesive bond. Moisture can undercut the tape bondline and interfere with normal adhesion forces. 3M™ Silane Glass Treatment AP115 creates a hydrophobic surface that protects the 3M™ VHB™ Tape and bonds in even the most moist environments. Easy to apply and clear in color

Recommended Applications

• Glass treatment in wet or humid enviroments
• Construction industry

Application Instructions

1. Moisten a clean, soft absorbent, lint-free cloth with the silane solution (or spray solution onto surface) and wipe the area to be bonded in one direction. Immediately follow with a dry lint-free cloth (two-cloth method).  A thin “mono-layer” of the silane solution gives the best results.
2. The glass should be completely dry with no film residue visible.* Under normal room temperature conditions it is best to wait 1 to 2 minutes before applying the tape so that any residual moisture can evaporate.
3. Apply 3M™ VHB™ Tape within 15 minutes after treating the surface to minimize the risk of recontamination of the surface.