These pressure sensitive adhesive backed products can be shear cut, die-cut, or
converted by other application methods. When used as a handle wrap, material
should be wrapped so edges overlap opposite the stress direction. If wrapped handle
is to be used in a pushing mode, overlap the wraps from top to bottom. If handle is to
be used in pulling mode, overlap wraps from bottom to top. The leading and ending
edges of the wrap should be secured with end caps or tape designed for that purpose,
Minimum tension should be used to avoid stretching and distortion of the product.
Avoid direct contact with heated processing surfaces, in excess of 160°F (71°C), for
prolonged periods of time.
These Trail Bags are designed to give you enough product for testing and prototyping
your application ideas.
|
|
|
3M™ Gripping Material TB400, TB731, TB614, TB631, and TB641
The gripping material can be hand washed with mild detergent in cool to warm water
once it is affixed to a handle or part.
Surface contamination – lint or other debris – can be easily removed with a Scotch® Lint
Roller and Scotch® Lint Sheets, or other lint removing mechanisms.
Do not bleach
Do not iron
Do not use in a dryer
Do not dry clean
|
|
|
